 |
 |
 |
 |
 |
 |
HOME | ABOUT US | PRODUCTS | COMPANY NEWS | LATEST TRENDS | CONTACT US |
 |
|
| PACKING DETAILS | APPLICATIONS | TILE LAYING TIPS | FLOOR MAINTENANCE | FAQs | |
| Note: Shades of Tile images shown in this leaflet are as accurate
as the limitations of the printing process will allow. It is advised
to see the original tiles before laying. Certain amount of variation
in shade or size are inherent characteristics of all products which
are fired at high temperatures. The laying instructions indicated
on the carton are to be strictly followed. No claims will be entertained once the tiles are laid. |
*Applicable to First Quality Tiles only
TECHNICAL SPECIFICATIONS OF CERAMIC TILES
Regency Ceramic Tiles adequately meet the following standards
EN177
Group B II A/1991 and IS: 13755/1993
Quality Parameters STANDARDS |
 |
Size Tolerance Length and Width +0.5% |
|
Thickness Tolerance +5% |
|
Modulus of Rupture >24N/mm |
 |
Water Absorption <6% |
 |
Warpage +0.50% |
 |
Chemical
Resistance Resistant
to Alkalies and Acids
(except
Hydrofloric Acid) |
|
Scratch Resistance Hardness is around '5' on MOH's scale |
 |
Straightness of Sides +0.50% |
 |
Rectangularity +0.60% |
TOP
|
|
TOP
TECHNICAL SPECIFICATIONS OF REGENCY DURO TILES
Quality Parameters |
I.S. - 4457 | REGENCY |
| |
Deviation in Length | +2.5% | +0.75% |
|
Thickness Tolerance | +2.5% | +2.0% |
|
Surface Flatness | +1.5% | +0.5% |
|
Water Absorption | 3-6% | 3-6% |
 |
Thermal Expansion | Max.9x10-6 K-1 |
< 9x10-6 K-1 |
|
Resistant to Alkalies and Acids | <1.5% | <0.4% |
|
Mohs Hardness | -- | 8 |
 |
Wedging | +1.0% | +0.5% |
 |
Moisture Expansion | Nil (En 176) | Nil |
 |
Thermal Shock resistance | +0.5% | +0.5% |
 |
Breaking Strength | -- | >400 kg/cm2 |
 |
Density(g/cm3) | >2(EN 176) | 2.4 |
 |
Stain resistance | Resistance(EN 176) | Resistance |
 |
Abrasion resistance | <204nm2(EN 176) | <180mm2 |
 |
Flexural Strength | >20N/mm2 | >45 N/mm2 |
TOP
TECHNICAL SPECIFICATIONS OF REGENCY LAMINA TILES
Regency
Ceramic Tiles adequately meet the following standards
Quality Parameters |
IS: 13755/1993 | REGENCY |
| |
Deviation in Length | +0.6% | +0.5% |
|
Thickness Tolerance | +5% | +5% |
|
Edge Straightness | +0.5%± 0.3 % | +0.5% |
|
Squareness | +0.6% | +0.5% |
 |
Surface Flatness | +0.5% |
+0.5% |
|
Water Absorption | 3 - 6 % | 3 - 6 % |
|
Mohs Hardness | -- | 5 |
|
Thermal Expansion | Max.9x10-6 K-1 | <9x10-6 K-1 |
|
Thermal Shock resistance | No Damage | No Damage |
|
Resistant to Alkalies and Acids | No effect | No effect |
|
Abrasion resistance
|
as specified by the
|
manufacturer: CLASS II |
TOP
TECHNICAL SPECIFICATIONS OF REGENCY WALL TILES
Regency Ceramic Tiles adequately meet the following standards
Quality Parameters |
IS13753 / 1993 | REGENCY |
| |
Deviation in Length | ± 0.5% |
± 0.3% |
|
Thickness Tolerance | +0.6mm |
+0.3mm |
|
Edge Straightness | +0.3% |
+0.3% |
|
Squareness | +0.5% |
+0.5% |
|
Surface Quality | Min. 95% free from visible defects |
95% free from visible defects |
|
Water Absorption | 10 – 20
% |
10 – 18
% |
|
Crazing Resistance | Required |
Conform to 3 cycles |
|
Co – efficient of linear thermal expansion. | Max.9x10-6 |
<9x10-6 |
|
Thermal Shock resistance | Required |
Resistant up to 10 cycles. |
|
Resistant to Alkalies and Acids | Required If Agreed |
Resistant to all Acid and Alkalis
( except Hydro Floric acid and its compounds) |
|
Hardness on Moh’s Scale |
as specified by the |
Manufacturer: PEI – II |
|
Resistance to Staining | min. class – 2
|
min. class - 2 |
TOP